Conventional Fire Alarm Systems

Control Panel

Modular Type Control Panel

Fire Panels will be the brain behind the fire alarm systems. These units will notify the user about the fire condition with a clear indication about the zones in which fire was sensed.

SPECIFICATIONS
TYPE OF SYSTEM	Fire Detection & Alarm System
NO. OF ZONES PROVIDED	1 to 200 zones
POWER SOURCE	230V AC
TYPE OF DETECTORS USED IN THE INSTALLATION	Ionisation type smoke detectors Photoelectric smoke detectors Fixed temperature cum rate of raise in temperature detectors
WIRING REQUIRED	2 wires
FAULT INDICATION/ALARM PROVIDED FOR	Open circuit in detector cabling for each zone. Short circuit in detector cabling for each zone. AC failure. Battery low. (adjustable from 22 V to 23 V)
VISUAL INDICATIONS
FIRE	Two flashing red LEDs in the zone under "Fire".
FAULT	Two steady glowing yellow LEDs in the corresponding zone.
CHARGER ON	One separate yellow LED for "Charger On" indication.
SYSTEM ON	One separate green LED for "System On" indication.
AC & DC FUSE BLOWN INDICATOR	Separate red color LED for AC & DC "Fuse Blown" indication.
AUDIO ALARMS	Fire: A beep sound in the panel. Fault: A continuous tone in the panel After alarm cancellation Hooter sound changes to a low continuous tone & when another zone enunciates fire again, the main Hooter gets activated. Audio alarm can be silenced by ALARM CANCEL button.

Feather Touch Control Panel

2 zone and 4 zone fire Alarm Control Panel Designed for Homes, Offices, Shops, Banks, Godowns, Hospitals, Petrol Pumps, Farm Houses etc. The System has been Developed Indigenously by our R & D Division, Conforming to BIS 2189 Standards. The System has been Manufactured by us to withstand Indian conditions for long life and Uninterrupted Service. The Systems Offers Exceptional Features, a Power Supply that Handles the Panels Full Rated Load Plus Quick and Simple front Panel access to suit the application at hand.

FEATURES

CONFORMS TO BIS 2189
COMPACT,EASY TO INSTALL AND MAINTAIN
SUPPORTS A WIDE VARIETY OF DETECTORS
PROVISION FOR AUTO DIALER
PROVISION FOR AUTO DIGITAL METERS
ZONE WISE HOOTERS
POTENTIAL FREE CONTACT FOR CUSTOMER USE
FULL FEATURED BUILT IN TEST FACILITY
FULLY PROTECTED POWER SUPPLY WITH BUILT IN CHARGER.

SPECIFICATIONS

ELECTRICAL	PHYSICAL
POWER SUPPLY INPUT: 230V, 50Hz BATTERY BACKUP: 24V, 7AH OPERATING VOLTAGE: 24V BATT. CHARGER: CONSTANT VOLTAGE END OF LINE: 4.7K W NORMAL PANEL CURRENT: 300mA PANEL ALARM CURRENT: 400mA	WEIGHT: 2.5 Kg (WITHOUT BATTERY) SIZE:325 X 225 X 100 mm COLOUR: SIEMENS GRAY

AUDIO-VISUAL INDICATIONS	OUTPUT
SYSTEMS ON CHARGER ON AC FAIL BATTERY LOW FIRE OPEN SHORT ISOLATE	FOR HOOTER: 24V, 1A MAX AUX. RELAY CONTACTS